Chart Management
Above the chart, there is a toolkit with useful buttons:
Area selection | Activate the button in order to zoom in any selected chart
area. Select an area holding left mouse button. This operation can be
repeated multiple times. | |
Lock/unlock Y axis | Button to switch between working with a single axis (X) to
multiple axes (XY). | |
Autoscaling | Go back to a default chart scale by clicking this button. | |
Zoom in/zoom out | The buttons to scale a chart along the X axis. Click a button
in order to make a visible area of the chart twice as wide/narrow in regard
to the current position. Yet the center of the chart stays in its place. | |
Messages/point tracing | Switching between these modes, you can view details either of
a single chart or all the available ones. | |
Save as PNG | To save a visible chart area along with the axis in PNG
format, click this button. | |
Lock charts | This button appears in the 'Dual report view' mode. Activating
this button allows to apply the same actions to the charts simultaneously. |
If the X axis shows time, you can click on any place of the chart to move to the corresponding location on the map.
Transfer from chart to messages
You can move to unit's messages straight from an online chart to analyze
initial data. To do this, press the 'Transfer to messages' button in
the toolkit. Then, click on any place of the chart to load messages for
the reported period with focus on clicked point. Other functionality is
the same as with tables.
Upon switching between charts, the button receives a default state automatically.
Chart Legend
A chart legend can be found in the work area. The legend contains
several sections of information on the chosen charts and their parameters.
Using the legend you can choose parameters to be shown on a chart (all
of them are shown by default). To enable/disable any parameter, click it
in the legend.
Related Articles
Chart Management
It is possible to scale, move the charts and view the information about individual points. Above the chart, there is a toolkit with useful buttons: Area selection Click this button to scale (zoom in) any selected area. Hold left mouse button and ...Chart Properties
There are two tabs in the chart properties: «Data» и «Settings». Data Selection On the Data tab, you can select the curves that should be displayed in the chart. The selection is only available for charts of the Regular type. Mark the curves you want ...Chart Parameters
Sensors Masks In the parameters block (right part of the dialog) you can indicate particular sensors on the basis of which the corresponding charts will be built. This selection does not affect such charts as 'Speed', 'Altitude', 'Fuel consumption by ...Management System
The management of GPS tracking system gTrack is realized through a specialized interface designed for gtrack managers — CMS Manager. CMS Manager allows you to manage your tracking service by means of such system macro objects as accounts, billing ...Geofences Management
In the work area there is a list of all available geofences. To move to the necessary geofence on the map, click on its name in the list. Put check marks in the left column of the table to choose the geofences you want to be displayed on the map. ...