Maps

Maps

Maps settings are adjusted in the User Settings dialog on the Maps tab.


Map source
Here you can enable or disable certain layers of maps by checking the appropriate boxes. Changes are applied after clicking OK and refreshing the page. To select a different map as a base layer, choose it in the maps menu.


The following maps can be used in gTrack: Google, Bing, Kosmosnimki, 2GIS, WikiMapia, Visicom, Yandex, HERE, Regio, Luxena, what3words, MyIndia, ArcGIS, GoMap.az, Mapbox, OpenStreetMap, OpenSeaMap (additional layers). Besides, Gurtam Maps are available by default.

Some maps go in blocks. For example, when you enable Google Maps, several map layouts appear on the menu at once: Google Streets, Google Physical, Google Satellite, Google Hybrid, Google Map Maker, Google Map Maker Hybrid, and Google Street View for tracking on mini map. Moreover, if the additional layers are available (for example, traffic layer, maritime navigation), they can be visually displayed on top of any chosen map.

If there is no option to activate a map type, address your request to gtrack Help System.

 Use of cartographic services is stipulated by the procedures established by the author or by other rightholder of such services. When choosing a cartographic service you confirm that you acknowledge and accept the full responsibility for its possible misuse.

Geodata source
In this section you can select the source of address information used in the Monitoring panel, in the tooltips of units and tracks, in the Messages panel, while creating geofences and routes. Possible sources of geodata are Gurtam, Google, Visicom, Yandex, Mapbox, HERE, Luxena, what3words, ArcGIS. Only the maps that are activated in the site's properties are displayed in the list of available. ​

 If a geodata source other than Gurtam is chosen, the Format of coordinates block becomes unavailable. ​

Address format
Here you can specify the format for displaying address information in tooltips, tools, messages, and other places. Choose which of standard address components should be displayed: country, region, city, street, and house (at least one of these items should be selected). For example, if your units move mainly within the same city or town you can omit the country, region, and city and leave only the street name and house number in addresses. Address components can be put in any order. To change this order, drag components up and down using the arrow-shaped buttons. This format affects addresses mainly in cities/towns/villages.

This format is especially relevant if the units are moving around the city. For addresses outside the city (near roads), the following two settings are important:

  • Max distance from unit determines that if the unit is on thew road or close to it and there is a city/town/village at a specified distance, the address is displayed as the name of the road and the distance to that city (if several cities are found, then to the nearest one).
  • Min city radius determines that if at a distance specified as Max distance from unit, no settlement is found, then the address is bound to some other city. The radius of the city that can get into the address information can be specified in this parameter. It may be necessary, for example, if only large cities should appear in addresses.
Format of coordinates
The coordinates of the cursor shown in the lower right corner of the map can be either in degrees or in degrees and minutes. This option only influences the cursor's position format.

For the Map source and Format of coordinates blocks there is a possibility to check all the boxes at once. To do so, hold the Ctrl key and check any box of the corresponding block.


    • Related Articles

    • Print Report

      After generating an online report, you can print it without first exporting it to a file. To do this, press the Print button, which is located above the active table or chart only when there is a generated report in the browser window. In the left ...

    • User Settings

      Users can configure some system operation parameters according to their needs and tasks.  Note. User settings can be changed if the corresponding checkbox has been marked in the user properties dialog. To view user settings click on the username in ...

    • User Settings Transfer

      Individual settings can be transferred from one user to others or stored in a file. You can import data from the User Settings dialog, Settings, Maps tabs, and Monitoring panel. To do so, you should have the Edit not mentioned propertiesaccess to a ...

    • Frequently Asked Questions

      Reports Determination of Fuel Consumption by Math Calculating Fuel: Time-Based or Trip-Based Common Report for All Units False Thefts or Fillings Fuel Filling Is Not Detected Fuel Theft Is Not Detected Incorrect Intervals of Engine Hours Incorrect ...

    • Routing

      This tool helps to quickly make routes from one point to another visiting any number of intermediate points. You can define the sequence of points yourself or the program will optimize it for you. You can indicate key points double-clicking on the ...