No Parameter for a Sensor
Why there is not parameter for a sensor?
Make sure your device is able to work with this sensor.
Double-check all parameters. It is possible that the necessary parameter has another name. Usually, adcX stands for analogue inputs, inX for digital inputs, outX for digital outputs. Some parameters can have prefixes like can_ (parameters for CAN bus).
Some devices send sensor data in separate messages and not together with positional messages. In this case, you can either adjust device to send messages of this type or adjust a command in gTrack to query such messages from time to time.
If you are sure the sensor is compatible with your device, connected properly, and sends data to gTrack, then write to support@gtrack.com.mm with the request to support your sensor, and attach the latest version of the communications protocol for your device.
Related Articles
Sensor Parameter
Parameter is a required sensor property. Most of sensors are based on a parameter coming in messages. Parameters can be of any names. These names are predefined in the device configuration, for example, param199, param240, TEMP, pwr_int, gsm, can6, ...
Sensor Types
Table of Contents Sensor Types Mileage Digital Gauges Engine Fuel Other Sensor Types There are many types of sensors. When configuring a sensor (see sensor properties), the selection of sensor type depends on the device used and its principle of ...
Sensor Properties
...
Sensor Tracing
This table shows sensor values at certain points in time. The table can be exported in MS Excel where you can build any custom charts based on the data provided. The report can include all messages or take a value in a time interval (like take a ...
Validation of Sensors
Validation is configured in the sensor properties and defines interdependence of the sensors. Validator is a sensor whose value affects the current sensor. It is selected from the list of available sensors previously created for the same ...