GPS Hardware
Unable to Execute a Command
What to do if I cannot execute a command over a unit? Check user's access rights – the flag 'Execute commands' is required. Check if the command is written in unit properties (on the 'Commands' tab). In the properties of the command itself, see which ...
Protocol for a New Device
Is there a recommended protocol for manufacturers of GPS devices? Your program or hardware (device) will be supported in gTrack faster and more efficaciously if you use one of previously supported protocols. For new devices, we ...
No Parameter for a Sensor
Why there is not parameter for a sensor? Make sure your device is able to work with this sensor. Double-check all parameters. It is possible that the necessary parameter has another name. Usually, adcX stands for analogue inputs, inX for digital ...
New Hardware Support
What to do to support a new type of tracking hardware in gTrack? To integrate a new device in gTrack, send a request to support@gtrack.com.mm
Device Does Not Connect
What to do if I am directing a device to the server and cannot see any messages from it? It says my device is not connected. Var 1: The device is not connected or adjusted properly. There can be several reasons why a device has the status not ...
Calibrating a Fuel Tank
How to make calibration of a fuel tank? General procedure of calibration for an analogue FLS (fuel level sensor): Empty the tank completely. Make sure the vehicle accumulator is charged and will not go flat in a couple of hours. Cut the FLS to the ...
GPS Hardware
Calibrating a Fuel Tank Device Does Not Connect New Hardware Support No Parameter for a Sensor Protocol for a New Device Unable to Execute a Command