Tables
Images
This report shows all the images received from a unit. Click on the image to open it. Click Save as in the lower left corner of the image file viewer to save it. Moreover, every image contains additional information, such as the date, time, and the ...
GPRS Traffic
This report is executed if a unit has registered events of GPRS traffic counter reset or traffic storage was adjusted with the help of a corresponding job. Time — the time when the counter value was registered. Current value — the value at the moment ...
Geofences
To generate a report on geofences, you should select one or several geofences in the parameters of the table. In this report you can use both the geofences from the resource in which the report template is created and the geofences from other ...
Fuel Traffic
This report is designed to display in one table the data about fuel fillings and thefts, as well as the intervals of operation of the counter sensor of the unit. For each type of activity (fuel filling, theft, counter operation) you can customize its ...
Fuel Thefts
In this report, you can find out when, where and how much fuel was stolen. The parameters for this report are set in Unit Properties => Fuel Consumption. In the table, you can have the following columns: Beginning — the date and time when the theft ...
Fuel Fillings
This report shows where and when a vehicle was filled up. The parameters for the report are set in Unit Properties => Fuel Consumption. This report is generated on the basis of fillings registered manually or detected by sensors. The table cannot be ...
Visited Streets
This report shows which streets were visited and when. Highways, roads, and other places with available addresses are also considered as streets in this report. The following columns can be presented in this kind of report: Street: street, roads, ...
Violations
Violations are particular case of events. The report on violations gives the list of violations detected and registered in unit history. Violations are: Triggered notifications which method of delivery is Register as violation; Manually registered ...
Video
This report provides you with a list of video files received from a unit. The report contains the fixed number of columns: Time: time a video file being received; Location: location of a unit upon sending video file; Video: here you can find an icon ...
Utilization Cost
The table on utilization costs unites two kinds of expenses: maintenance and fillings. Both of these things have their own detailed tables (see Maintenance and Fuel Fillings). This table is designed to show running costs. Note that only fillings ...
Upcoming Maintenance
Upcoming maintenance table contains a list of service works set for a unit, and status of their execution. A table may include the following columns: Service interval: a name of a service work indicated on the 'Service Intervals' tab of a unit ...
Unfinished Rides
See the Rides topic to learn how to prepare rides for this report. Unfinished is a ride when a unit left a beginning-ride geofence and after a while entered a beginning-ride geofence again. This can be the same geofence (if circle rides are not ...
Trips
This kind of report shows intervals of movement with indication of time, location, and other parameters such as speed, mileage, fuel, and many others. Intervals of movement (trips) are detected according to parameters set in Trip Detection and ...
Summary
This kind of report allows to from a table with diverse data concerning a period of time and at the same independent of any conditions like trips, sensor operation, geofence visit, etc. In other words, summary report processes all the messages for ...
Stops
A stop is one or more consecutive messages with a zero speed. Stops can be registered at lights, intersections, in traffic jams, etc. Stops should be distinguished from parkings. Parameters to detect trips, parkings, and stops are adjusted in the ...
Speeding
This kind of report shows speed limitation violations. The parameters for this report are set in Unit Properties => Advanced in the block of speeding. The messages (at least two in succession) containing a speed value greater than set in that ...
SMS Messages (for resource)
This report provides a possibility to view information about all the SMS messages sent by users of any resource for the indicated period of time. The information may contain the following columns: Time: time of sending a message. User: name of a user ...
SMS Messages (for unit)
This report gives possibility to view all SMS messages received from a unit in a specified period. Here you see date and time when the message was received and the text of the message. Time received: date and time when the data was received by the ...
Sensor Tracing
This table shows sensor values at certain points in time. The table can be exported in MS Excel where you can build any custom charts based on the data provided. The report can include all messages or take a value in a time interval (like take a ...
Rounds (for route)
A special report can be built to show units' performance of a certain route. The following columns can be presented: Beginning: round beginning time (activation time or entrance in the first check point). Last activity: time of latest event ...
Rounds (for unit)
If any routes were assigned to unit and events about routes were stored in unit history, a report based on these events can be generated: Route: route name. Schedule: schedule name. Round: round name. Beginning: round beginning time (activation time ...
Rides
gTrack can track rides between geofences if one of them (or several) is set as the starting point, and the other (or several) as the final one. Two factors are important to generate such report: when a unit leaves the starting geofence and when it ...
Profile
This kind of report shows the profile information indicated on the corresponding tab of the unit properties dialog. The following columns can be included in the table: Name — the name of an element. Value — indicated value. Notes — an empty column ...
Orders
Attention! To generate a report, activate the Orders service first. This kind of report displays detailed information about orders. A table can contain the following columns: Name — the name of the order. Time from — the time from which the order ...
Non-visited Geofences
This report gives the list of geofences that were not visited during the indicated time period. In the parameters of the table, select one or several geofences. In this report, you can use both the geofences from the resource in which the report ...
Messages Tracing
The main objective of this report is to facilitate the work with the parameters from the messages. That is why the parameter values are presented not as a single data array, but have a particular structure. It means that every parameter is located in ...
Maintenance
The Maintenance table contains the list of the service works performed during the indicated period and registered by the user for the selected unit. The following columns can be included in the table: Service time — the date and time indicated at the ...
Logs
The Log table can be generated for units, unit groups, users, resources, retranslators or routes. The log contains records about changes made in the properties of the object or its contents. To view the log of a unit, in addition to the Query ...
Executed Commands
This kind or report lists all the commands that were sent to a unit and successfully executed. Possible columns are: Sending time — the time when the command was sent to the unit. User — the name of the user who sent the command (hidden if you do not ...
Events
All events registered by the system (including violations) can be shown in the report on events. There are different ways to add events to the unit history: Using notifications if themethod of delivery is Register event for unit. Manually using the ...
Engine Hours
The Engine hours report shows how long the unit worked, how much time was in motion, how much fuel was spent for this period. Also, the duration and efficiency of the work of the attachable equipment can be shown. To generate this report, the unit is ...
Eco Driving
The report provides you with the information on how a driver handles the entrusted vehicle. Analysis of the driving behaviour can help you extend the life of the vehicle, reduce fuel costs, ensure cargo safety and also understand the reason of any ...
Digital Sensors
Usually, digital sensors have two states: on/off, activated/deactivated, etc. For example, it can be an ignition or cargo load sensor. All sensors are configured in Unit Properties => Sensors. In the report template you can select up to four sensors ...
Custom Fields
The Custom fields table represents a list of custom fields available on the corresponding tab of the unit properties dialog (see Unit Properties => Custom Fields). To get this report, you need the View custom fields and/or View admin fields access to ...
Counter Sensors
This table shows the operation of the Counter type sensors. In the template, set the mask (filter) for sensors or select All sensors. A table can consist of the following columns: Sensor — the name of the sensor. Activated — the time of activation. ...
Connection Problems
This kind of report lists the time periods when the system did not receive data from the unit. The parameters for this report are adjusted in Unit Properties => Advanced where you set Maximum interval between messages. The following information can ...
Chronology
The Chronology report gives information about all the actions and changes in the unit state during the indicated period of time. Unlike most of other tables that are dedicated to a particular state (parkings, sensors, trips, etc.), this table ...
Check Points
Route points refer to check points indicated when creating a route. The table can include: Point name — the name given to this check point while creating it. Real arrival — the time when the unit entered the check point. Scheduled arrival — the time ...
Chat
This report combines the commands of the Send message to driver type sent to the unit, and replies from the unit. How chatting with the driver works was written above Time — date and time when the message was received. Sender — driver or operator ...
Account Tree (for resource)
This report provides you with information about the structure of an account. In other words, the table helps you understand which object types the selected account consists of, as well as the hierarchy among these objects. The table may contain the ...
Next page