Security
On the Security tab of the user settings dialog you can make the authorization settings and enable two-factor authorization.
Authorization settings
E-mail
An e-mail address is required to recover the password in case it is lost
and to receive a verification code when the two-factor authentication
is enabled.
Change password
Type in your current password, and then your new password (twice). Click OK to save.
Attention!
No every user at the time of its creation is provided with the right to change the password.
Mobile access code
If you are going to use a mobile phone or other portable device to manage the server, enter the access key. If you leave this field
empty, the access will be denied. This code is only required for gTrack Mobile v1.
Two-factor authentication
To enable two-factor authentication, in the drop-down menu select the
method of receiving the confirmation code: via e-mail or by SMS.
Via e-mail
The code is sent to the e-mail address specified in the authorization settings. To confirm the address, press Send e-mail and enter the received code in the line that appears.
Via SMS
Specify the phone number to which you want the code to be sent. To confirm the phone number, press Send SMS and enter the received code in the line that appears. Standard rates apply for SMS messages.
In order to receive text messages, you should activate the SMS Messages service in the account properties and the Can send SMS function in the user properties.
In case SMS cannot be sent (for example, the service is disabled or the
number of available text messages is exceeded), the confirmation code
is sent to the e-mail specified in the authorization settings.
Related Articles
User Settings
Users can configure some system operation parameters according to their needs and tasks. Note. User settings can be changed if the corresponding checkbox has been marked in the user properties dialog. To view user settings click on the username in ...Monitoring Options
All the options that can be found in the Monitoring panel are described below. Depending on the tasks assigned, you can choose to display some columns and hide the others. To customize the columns in the Monitoring panel, press the special button in ...Math Consumption Wizard
The Wizard simplifies the process of creating and configuring the sensors for the mathematical calculation of fuel consumption. To open the Wizard, click on the corresponding button in the upper right corner of the Sensors tab of the unit properties. ...Chart Properties
There are two tabs in the chart properties: «Data» и «Settings». Data Selection On the Data tab, you can select the curves that should be displayed in the chart. The selection is only available for charts of the Regular type. Mark the curves you want ...Chart Parameters
Sensors Masks In the parameters block (right part of the dialog) you can indicate particular sensors on the basis of which the corresponding charts will be built. This selection does not affect such charts as 'Speed', 'Altitude', 'Fuel consumption by ...