Trip Not Detected

Trip Not Detected

A vehicle definitely moved (there are messages with 70 kph speed), however, this trip is not shown in the report.

Possible explanations and actions:

  • Movement detection is set incorrectly in the trip detector, e.g., the ignition sensor is out of operation or configured inproperly.
  • If some filtration of intervals is selected in the reports template (by minimum mileage, by stops, etc.), those filters can weed out this trip. Clear the filters or correct them.
  • The interval for data transmission which is set in the device is bigger than 'Minimum parking time' option set in the trip detector. Either configure the tracker to send data more often or increase minimum parking time value.
  • Check other parameters of the trip detector.

    • Related Articles

    • Trip Detection

      Required access: View detailed properties — to view this tab; Edit trip detector and fuel consumption — to edit this tab. The trip detector is configured in the Unit Properties dialog and is used to detect movement intervals (trips) and idles (stops, ...

    • Fuel Theft Is Not Detected

      A fuel theft was made but it is not shown in the report. Why? Possible explanations and actions: 1. Test theft right before fuel filling. If you made a defueling for test purposes and then refueled the vehicle right away, the system may regard this ...

    • Calculating Fuel: Time-Based or Trip-Based

      What is the difference between time-based and mileage-based calculation of fuel level? 1. Mileage-based calculation In a standard situation, all calculations of fuel level are mileage-based. That means data from the FLS is taken only during intervals ...

    • Fuel Filling Is Not Detected

      We have refuelled the vehicle but cannot find this filling in the report. Why? Possible explanations and actions: 1. Incorrect settings for trip detector. The option to analyze fuel filling only at stops is set on the 'Fuel Consumption' tab of unit ...

    • Trips

      This kind of report shows intervals of movement with indication of time, location, and other parameters such as speed, mileage, fuel, and many others. Intervals of movement (trips) are detected according to parameters set in Trip Detection and ...