Sent Commands

Sent Commands

The commands sent to the unit by users are displayed on the Sent Commands request. There is a special button in the monitoring panel to send commands to units. The table includes:
  • Time — the time when the command was sent to the unit.
  • User — the login name of the user who performed the command. If there is a dash in this cell, it means you have no access to this user, that is why the login name is hidden.
  • Command name — the command name as it is written in the unit properties.
  • Command type — the command type (see the list).
  • Parameters — for the commands that require additional parameters (message to the driver, input activation/deactivation, report period, custom message, etc.).
  • Execution time — the time when the command was executed. If execution failed due to billing limitations (e.g., you ran out of SMS messages), this column contains only dashes.
  • Channel — the type of connection used to transmit the command (TCP, UDP, Virtual, SMS).



    • Related Articles

    • Commands

      A command is a request that can be sent to a unit. In response, the unit can send its coordinates, take a picture, activate an output, block engine, etc. Available commands depend on the type of device used and its configuration. To be executed, a ...

    • Commands

      Required access: View commands — to view this tab and its contents; Create, edit, and delete commands — to create, edit, and delete commands. The Commands tab of the Unit Properties dialog gives possibility to create and configure commands for the ...

    • Executed Commands

      This kind or report lists all the commands that were sent to a unit and successfully executed. Possible columns are: Sending time — the time when the command was sent to the unit. User — the name of the user who sent the command (hidden if you do not ...

    • Commands

      The following commands are supported in gTrack Mobile Client: Query position; Block engine; Unblock engine; Activate output; Deactivate output; Set data transfer interval (how often unit sends data to the server); Send custom message (sending of a ...

    • Chat

      This report combines the commands of the Send message to driver type sent to the unit, and replies from the unit. How chatting with the driver works was written above Time — date and time when the message was received. Sender — driver or operator ...